The
Samson Expedition XP300 is a 6" 2-way 300W all-in-one portable Bluetooth-enabled stereo PA system designed to provide multi-channel mixing and amplification for musicians, DJs, and presenters in concert venues, clubs, and special events. It features two speaker cabinets, a removable 6-channel mixer, two 10' speaker cables, and a power cable. 300W of Class-D amplification drive each cabinet's 6" woofer and 1" tweeter to yield a frequency response of 40 Hz to 20 kHz.
The 6-channel mixer offers XLR, 3.5mm, and 1/4" input jacks for easy hook-up of microphones, instruments, or music players. The built-in Bluetooth receiver enables wireless streaming from mobile devices such as smartphones and tablets. A USB Type-A port allows you to connect a Samson XPD wireless microphone system (available separately).
Sweeten your sound with 2-band equalization controls and sixteen digital effects such as reverb and delay. Utilize the 1/4" speaker outputs to connect the supplied speaker cables to the stereo speaker cabinets. Add a dedicated subwoofer via the 1/4" sub output. Integrated carry handles and an interlocking design deliver flexible transport methods as the speakers can be carried individually or as a combined unit.
| Portable PA System | |
| Speaker Configuration | 2 x 2-Way Loudspeaker
|
| Number of Input Channels | 6 (2 x Mono, 2 x Stereo)
|
| Amplifier Power Rating | 300 W RMS (at 4 Ohms)
|
| Amplifier Class | Class-D
|
| Impedance | Amplifier:
4 Ohms (per Channel)
|
| Speakers | |
| Enclosure Type | Bass-Reflex
|
| Full-Range Driver | |
| Full-Range Driver (Oval) | |
| HF Driver | 1 x 1" / 2.5 cm Tweeter (per Speaker)
|
| HF Voice Coil | |
| MF Driver | |
| MF Voice Coil | |
| LF Driver | 1 x 6" / 15.2 cm Woofer (per Speaker)
|
| LF Voice Coil | |
| Subwoofer Driver | |
| Subwoofer Voice Coil | |
| Magnet | |
| Speaker Sensitivity | |
| Signal Processing | |
| Crossover | |
| Input Pad | |
| EQ | HF Shelf:
±15 dB at 10 kHz
LF Shelf:
±15 dB at 100 Hz
|
| Semi-Parametric EQ | |
| Effects | 16 x Preset (Factory)
|
| DSP | 24-Bit DSP
|
| Filters | |
| Dynamic Processing | |
| Form Factor | |
| Capsule | |
| Polar Pattern | |
| Output Connector | |
| Operating Voltage | |
| Microphone Sensitivity | |
| Muting | |
| Performance | |
| Frequency Response | 40 Hz to 20 kHz
|
| Frequency Range | |
| Maximum SPL | |
| Max Coverage Distance | |
| Max Coverage Area | |
| Coverage Angle | |
| Coverage Angle | |
| Input Sensitivity | |
| Gain Range | |
| Max Input Level | |
| I/O Impedance | |
| SNR | |
| THD | |
| Dynamic Range | |
| Protections | |
| Connectivity | |
| Audio I/O | 2 x XLR 3-Pin Female Balanced Mic Input
3 x 1/4" TRS Female Balanced/Unbalanced Line Input
1 x 1/8" / 3.5 mm TRS Female Aux Input
1 x 1/4" TS Subwoofer Output
2 x 1/4" TS Speaker Output
|
| Phantom Power | +24 V (Fixed)
|
| USB | 1 x USB Type-A (Wireless Audio)
|
| Media Playback | |
| Media & File Formats Supported | |
| Network I/O | |
| Wireless Connectivity | Bluetooth
|
| Wireless Transmission | |
| Max Wireless Range | |
| Number of RF Channels | |
| RF Frequency Band | |
| RF Bandwidth | |
| Form Factor | |
| RF Output Power | |
| Transmitter I/O | |
| Max Number of Simultaneous Transmitters | |
| Diversity | |
| Antenna | |
| Squelch | |
| Approximate RF Sensitivity | |
| Deviation | |
| Modulation | |
| RF Channel Crosstalk | |
| Spurious | |
| Bluetooth | |
| Bluetooth | 3.0
|
| Bluetooth Profiles | A2DP
|
| Pairing | Manual
|
| Bluetooth Channel | |
| Frequency | |
| Bluetooth Power Class | |
| Bluetooth Input Gain | |
| Transmitter Power | |
| Bluetooth Range | |
| Power | |
| Battery Type | |
| Approximate Battery Life | |
| Battery Charging Time | |
| Internal Battery Capacity | |
| Battery Cycle Count | |
| AC Input Power | Universal:
100 to 240 VAC, 50 / 60 Hz
|
| Power Supply Output | |
| Current Consumption | |
| Power Consumption | 180 W
|
| DC Input Power | |
| AC Power Connector | |
| Physical | |
| Cable Length | Speaker:
10' / 3.0 m
|
| Transport Options | Speaker:
1 x Handle (Top)
|
| Mounting | 1.38" / 35.05 mm Pole Socket (Bottom)
|
| Stand Height | |
| Stand Load Capacity | |
| Cooling | |
| Construction Material | ABS, Metal Grille
|
| IP Rating | |
| Operating Temperature | 14 to 104°F / -10 to 40°C
|
| Storage Temperature | |
| Operating Humidity | |
| Certifications | |
| Dimensions | 15.6 x 8.6 x 13.9" / 395 x 218 x 354 mm (Full Assembly)
|
| Weight | 24 lb / 10.8 kg (Full Assembly)
|
| Warranty Length | Limited 2-Year Warranty
|